Plain - No indicator. For direct visual inspection of liquid. Mounts in any direction. Model   Body Material   200     Carbon Steel   240     Bronze   260     316 Stainless   290     Iron Rotator - Paddlewheel indicator used for clear media to enhance flow indication. Any direction. Model   Body Material   201     Carbon Steel   241     Bronze   261     316 Stainless   291     Iron Flapper- Side flapper to indicate flow in one direction. Not for vertical down flows. Model   Body Material   202     Carbon Steel   242     Bronze   262     316 Stainless   292     Iron Drip Tube- Designed for very low flows so fluid drips off tube insert. Mainly vertical mounts. Model   Body Material   203     Carbon Steel   243     Bronze   263     316 Stainless   293     Iron

Features • Sizes 1/4" to 16" Flanged • 150# ANSI Rated • Single Piece Cast Body • Other Materials Available • Teflon Lining Available Ratings • Carbon Steel:     285 psi @ 100°F     230 psi @ 300°F  • Bronze:     225 psi @ 150°F     180 psi @ 300°F  • Stainless Steel:     275 psi @ 100°F     195 psi @ 400°F • Iron:     175 psi @ 150°F     145 psi @ 300°F Materials (Wetted) • Glass: Temp Borosilicate • Seals: Neoprene                Teflon®* in Stainless • Rotator: Teflon®* • Flapper: 316 SS • Drip Tube: 316SS  For Iron and Bronze units subtract 1/8" from  "A" due to flat face Flanges. *Temperature ratings are dependent  on Seal material.

Note: Steam service requires mica shields, graphoil gaskets, and belleville washers.

Unit Size Dimensions in Inches & (cm) A B D Wt.lbs 1/2, 3/4 4-5/8 (11.7) 1-1/4 (3.2) 3-15/16 (10.0) 4 1 5-5/8 (14.3) 1-1/2 (3.8) 4-1/2 (11.4) 7 1-1/4, 1-1/2 6-1/2 (16.5) 2-3/8 (6.0) 5-3/4 (14.6) 15 2 7-7/8 (20.0) 2-7/8 (7.3) 7-3/8 (18.7) 26 2-1/2, 3 9-3/8 (23.9) 3-3/4 (9.5) 8-15/16 (22.7) 52 4 11 (27.9) 4-3/4 (12.1) 9-1/2 (24.1) 70 6 14-1/4 (36.2) 7 (17.8) 13-9/16 (34.5) 125

Rotator - Paddlewheel indicator used for clear media to enhance flow indication. Any direction. The glass is held in place by a snap ring. Model   Body Material             Bronze

Features • Economical • Sizes 1/4" to 2" NPT • Single Window Ratings • 125 psi @ 200°F Materials (Wetted) • Glass: Temp Soda Lime • Seals: Buna N • Rotator: ABS Plastic